DEFINITION
It is a heat insulation floor covering based on specially modified silicone and elastomeric resin and made of natural spheres that have been vacuumed through special processes.
ÖZELLİKLERİ
It is water-based and provides heat, water and sound insulation and is fire resistant. Due to the silicone additive, its water impermeability is at a high level.
It can be used safely and guaranteed on all kinds of terraces, roof insulations, metal and wooden floors.
Gloss: Matte
Color: Any color can be produced.
Solid Matter: 70±2% (by weight)
Density: 0.80 gr/cm³
Application: Satin roller or spray
Spray pressure: 40Bar/580psi
Nozzle Diameter: 0.021”- 0.027”
Flash Point: Non-flammable
Single Layer Dry Film Thickness: 1.5- 2 mm
CONSUMPTION:
The consumption is 1.2-1.3 kg/m² depending on the type, absorbency and structure of the surface to be applied. A controlled sample study should be carried out for the exact consumption.DRYING TIME (at 20°C, 65% HR):
Touch dry: 2-4 hours, Second coat application: 12-24 hours, Final dry: 48 hours (drying time may be longer at higher relative humidity and lower temperatures).
It can be stored for 3 years in its unopened packaging, in a cool and dry place, protected from frost and direct sunlight. Close the lid of the packaging immediately after use in an airtight manner.
R 43: Cilt ile temasında hassasiyet oluşturabilir. S 2: Çocukların ulaşabileceği yerlerden uzak tutun. S 23: Buharını solumayın. S 24/25: Göz ve cilt ile temasından sakının. S 37: Uygun eldiven giyin. S 46: Yutulması halinde hemen bir doktora başvurun, kabı veya etiketi gösterin. S 56: Bu maddeyi ve kabını tehlikeli veya özel atık toplama yerlerinde bertaraf edin/ettirin.
It should be applied to surfaces that are cleaned from all kinds of oil, dirt and dust and have had their surfaces repaired. Isothermal Floor Coating application consists of 4-layer application. (1 layer primer, 2 layers coating and 1 layer polish). Before application, Isothermal Insulation Primer should be applied to the floor by saturating the floor with a brush or roller. Coating should be applied at least 2 hours after the primer application. The material should be mixed homogeneously with a mixer or mechanical mixer before coating application. It is ready for use. It is recommended to apply with a satin roller. During application, the roller is completely immersed in the bucket and the material is completely wrapped around the roller, excess material in the roller is shaken and poured into the bucket. The roller should be applied slowly and without pressing on the surface. At least 12 hours after the first layer application, the same application as the first layer should be applied as the second layer. At least 18-24 hours after the second layer application, Isothermal Silicone Polish is applied to ensure that the surface gains a shiny appearance, is protected against all kinds of external factors and becomes watertight.
WARNING: After application, do not walk on the ground for at least 48 hours.