Alya Lux Plastic Interior Wall PAINT
DEFINITION
It is an acrylic resin based, water based, matte looking, decorative, washable top coat luxury interior paint that complies with TSE – TS 5808 standard.
Alya Luxury Plastic Paint is applied on interior old-new painted/plastered surfaces, ceilings, walls, plaster, putty, drywall, betopan, OSB, glass textile surfaces and paintable wallpaper after the appropriate priming process is completed.
-Photoroom.jpg)
FEATURES
It is an environmentally friendly, decorative paint that is easy to apply, provides good covering, has breathability. It has excellent adhesion to the surfaces it is applied to. The water-repellent and vapor-permeable properties of its special content increase the erasability of the paint. It prevents swelling and flaking, especially in humid environments.
15 Liter / Plastic Bucket
CONSUMPTION:
Depending on the type, absorbency and structure of the surface to be applied, 12-16 m2 of area can be painted in a single coat with 1 liter. A controlled sample study should be carried out for exact consumption.
DRYING TIME (at 20°C, 65% RH)
Touch dry: 30 minutes
Second coat application: 6 hours
Final drying: 24 hours (drying time may be longer at higher relative humidity and lower temperatures).
It can be stored for 3 years in its unopened packaging, in a cool and dry place, protected from frost and direct sunlight. Close the lid of the packaging immediately after use in an airtight manner.
R 43: Cilt ile temasında hassasiyet oluşturabilir.
S 2: Çocukların ulaşabileceği yerlerden uzak tutun.
S 23: Buharını solumayın.
S 24/25: Göz ve cilt ile temasından sakının.
S 37: Uygun eldiven giyin.
S 46: Yutulması halinde hemen bir doktora başvurun, kabı veya etiketi gösterin.
S 56: Bu maddeyi ve kabını tehlikeli veya özel atık toplama yerlerinde bertaraf edin/ettirin.APPLICATION
The surface to be applied should be cleaned of all kinds of dirt, dust, mold oil, loose layers and made solid, dry, clean and self-supporting. In concrete, exposed concrete, newly plastered surfaces, the setting time should be waited (28 days) and loose plaster particles should be cleaned from the surface with rasping or similar methods. Necessary surface correction and repairs should be made. After light sanding of all old painted (water-solvent based) surfaces, primer application should be started. On absorbent and dusty surfaces such as plaster, lime, whitewash, gas concrete, Alya Binder 1/7 Primer should be applied as a single layer without combing and polishing (by rolling the roller one turn from top to bottom). Direct application should not be made on lime. During the application and product drying period, attention should be paid to the ambient and surface temperature being between +5°C and +30°C. In order to obtain the desired texture and ease of application, it is recommended to use a satin roller when applying on flat surfaces such as satin plaster and putty; and a plastic roller when applying on plastered and highly absorbent damaged surfaces.At least 15 litres of paint should be separated for touch-up operations and care should be taken to ensure that the dilution to be applied during the touch-up process is the same as in the first application.
THINNING
In brush and roller applications, it is recommended to dilute it by 15-20% with clean water and apply it in at least two coats.