ALYA LUXURY SATIN PAINT
DEFINITION
Styrene is an acrylic copolymer based semi-matte interior wall paint.
It can be used on all surfaces such as plaster, brick, exposed concrete, concrete, plasterboard, chipboard, etc.
FEATURES
It is a decorative paint that does not harm human health or the environment, has high covering properties, can be wiped, does not crack, is resistant to friction, has a low water emulsion and does not have an odor that bothers people.
15 Liter / Plastic Bucket
CONSUMPTION:
Depending on the type, absorbency and structure of the surface to be applied, 14-16 m2 of area can be painted in a single coat with 1 liter. A controlled sample study should be carried out for exact consumption.
DRYING TIME (at 20°C, 65% RH)
Touch dry 60 minutes
Second coat application: 6 hours
Final drying: 24 hours (drying time may be longer at higher relative humidity and lower temperatures).Açılmamış ambalajında, serin ve kuru yerde dondan, direkt güneş ışığından korunarak 3 yıl saklanabilir. Ambalajın kapağını kullanımdan hemen sonra hava almayacak şekilde kapatınız.
R 43: May cause sensitization by skin contact.
S 2: Keep out of reach of children.
S 23: Do not breathe vapour.
S 24/25: Avoid contact with eyes and skin.
S 37: Wear suitable gloves.
S 46: If swallowed, seek medical advice immediately and show the container or label.
S 56: Dispose of this material and its container to hazardous or special waste collection point.APPLICATION
It can be applied with a brush or roller. For application, the surface must be completely cleaned of all dirt, oil and swollen paint; the surface must be dry and solid. The surface is primed with Binder Primer to strengthen weak and raw surfaces and reduce paint consumption. Cracks on the surface are repaired with putty. After the surface is ready for paint application, Water Based Satin Paint is applied in 1-2 layers depending on the condition of the surface. At least 1 (one) hour should be waited between layers.At least 15 litres of paint should be separated for touch-up operations and care should be taken to ensure that the dilution to be applied during the touch-up process is the same as in the first application.
THINNING
In brush and roller applications, it is recommended to dilute it by 10-15% with clean water and apply it in at least two coats.