ALYA AKRİLİK DIŞ CEPHE BOYASI
DEFINITION
It is a pure acrylic binder based, matte looking, top coat exterior paint.
Acrylic Exterior Paint can be safely used for decorative and protective purposes on exposed concrete, all kinds of smooth or rough plastered, mineral-based surfaces, as well as on dirty, discolored old emulsion-based painted surfaces.
-Photoroom.jpg)
FEATURES
Uygulandığı yüzeylere üstün aderans gücüyle çok iyi tutunur. Güneş ışınlarına, dayanıklıdır. Nefes alma özelliği sayesinde yapı elemanları arasında buhar geçişini sağlar. Uygulandığı yüzeylerde yayılma özelliğinden dolayı kolay sürülür. Zaman ve işçilikten tasarruf sağlar.
15 Liter / Plastic Bucket
CONSUMPTION:
Depending on the type, absorbency and structure of the surface to be applied, 6-10 m² of area can be painted in a single coat with 1 Liter. A controlled sample study should be carried out for exact consumption.
DRYING TIME (at 20°C, 65% RH)
Touch dry: 1-2 hours
Second coat application: 8 hours
Final drying: 24 hours (drying time may be longer at higher relative humidity and lower temperatures).
It can be stored for 3 years in its unopened packaging, in a cool and dry place, protected from frost and direct sunlight. Close the lid of the packaging immediately after use in an airtight manner.
R 43: May cause sensitization by skin contact.
S 2: Keep out of reach of children.
S 23: Do not breathe vapour.
S 24/25: Avoid contact with eyes and skin.
S 37: Wear suitable gloves.
S 46: If swallowed, seek medical advice immediately and show the container or label.
S 56: Dispose of this material and its container to hazardous or special waste collection point.APPLICATION
The surface must be solid, clean, dry and self-supporting. Primed surfaces that are newly painted, and old painted surfaces, with universal primer after necessary ground preparation, will provide significant economy in paint consumption and will contribute to paint adhesion and liveliness to the maximum. It is recommended to wait 6-8 hours between coats. Make sure that the surface temperature is between +5°C and +30°C during application. Avoid application in a strong breeze and under direct sunlight. It is recommended to clean the used tools with water. Newly plastered surfaces should be given four weeks to dry. The surface should be protected from rain and frost for 12 hours before and after application (protective covers, heat machines). If the application will be made at air temperatures above +30°C, the application should be made on shaded facades and it is not recommended to apply between 11-16.In high-volume painting jobs to be done on exterior facades, it is important to take care to buy the products from the same batch in order to prevent tone differences. At least 15 liters of paint should be separated for touch-up operations and care should be taken to ensure that the dilution to be applied during the touch-up process is the same as in the first application.
THINNING
In brush and roller applications, it is recommended to dilute it with clean water by a maximum of 15% and apply it in two coats. In high-volume exterior painting jobs, care should be taken to dilute the products at the same rate to avoid tone differences.