DEFINITION
It is a thermoplastic resin based, single component, transparent, high durability, air drying glossy floor varnish.
FEATURES
It was developed to provide natural and permanent shine on all kinds of stone, natural stone, curb stones and brick surfaces.
It was developed to provide a bright and solid appearance to floors such as concrete, concrete parquet, stone, natural stone, etc.
10 Kilograms / Metal Bucket
CONSUMPTION:
Depending on the type, absorbency and structure of the surface to be applied, 6-8 m² of area can be painted in a single coat with 1 Kilogram. A controlled sample study should be carried out for exact consumption.DRYING TIME (at 20°C, 65% HR):
Touch dry: 30 minutes
Second coat application: 2 hours
Final drying: 12 hours (drying time may be longer at higher relative humidity and lower temperature).It can be stored for 1 year in its unopened packaging, in a cool and dry place, protected from frost and direct sunlight. Close the lid of the packaging immediately after use in an airtight manner.
R 10: Flammable.
R 20/21/22: Harmful by inhalation, in contact with skin and if swallowed.
R 43: May cause sensitization by skin contact.
S 2: Keep out of reach of children.
S 23: Do not breathe vapour.
S 24/25: Avoid contact with eyes and skin.
S 37: Wear suitable gloves.
S 46: If swallowed, seek medical advice immediately and show the container or label.
S 56: Dispose of this material and its container to hazardous or special waste collection point.
S 16: Keep away from ignition sources, do not smoke.
S 51: Use only in well-ventilated areas.All dirt and oil on the surface to be applied should be cleaned and the surface should be made clean, dust-free and dry. During varnish application, rainy or hot environments should be avoided, and shaded hours and areas that are not directly exposed to sunlight should be selected as much as possible. Application should be made in conditions where the ambient temperature is 15–30 ºC.
It should be applied without dilution.