ALYA LUXURY GLOSSY INTERIOR PAINT
DEFINITION
It is an acrylic emulsion based, water-based, glossy, long-lasting, decorative, top coat wood and wall paint.
It is used on all kinds of surfaces such as plaster, brick, brute, concrete, drywall, chipboard, wood, etc.
-Photoroom.jpg)
FEATURES
It can be wiped, has high covering and brightness. Unlike synthetic gloss paints, it does not lose its brightness over time, does not yellow or crack, and allows spaces to be opened for use in a short time thanks to the second coat application within 3-6 hours. It is easy to apply. It is not affected by severe weather conditions such as rain, snow, humidity, extreme cold or heat; it does not swell, crack and its colors do not fade. It allows buildings to breathe with its ability to expel moisture formed inside. Since it does not contain solvent and is diluted with water, it does not smell and does not harm human and environmental health.
15 Liter / Plastic Bucket
CONSUMPTION:
Depending on the type, absorbency and structure of the surface to be applied, 16-18 m2 of area can be painted in a single coat with 1 liter. A controlled sample study should be carried out for exact consumption.
DRYING TIME (at 20°C, 65% RH)
Touch dry: 2 hours
Second coat application: 6 hours
Final drying: 24 hours (drying time may be longer at higher relative humidity and lower temperatures).It can be stored for 3 years in its unopened packaging, in a cool and dry place, protected from frost and direct sunlight. Close the lid of the packaging immediately after use in an airtight manner.
R 43: May cause sensitization by skin contact.
S 2: Keep out of reach of children.
S 23: Do not breathe vapour.
S 24/25: Avoid contact with eyes and skin.
S 37: Wear suitable gloves.
S 46: If swallowed, seek medical advice immediately and show the container or label.
S 56: Dispose of this material and its container to hazardous or special waste collection point.APPLICATION
With a primer suitable for the surface structure; wood and mineral surfaces should be primed with Water Based Glossy paint diluted with 10-15% clean water. After the primer coat has dried, Water Based Glossy paint is applied to the surface in two coats without diluting using a well-saturated long-haired brush, mohair roller or spray system. At least 6 hours should be waited between coats.At least 15 litres of paint should be separated for touch-up operations and care should be taken to ensure that the dilution to be applied during the touch-up process is the same as in the first application.
THINNING
In brush and roller applications, it is recommended to dilute it by 10-15% with clean water as a primer and to apply it in two coats without diluting as a topcoat.