ALYA LUXURY CEILING PAINT
DEFINITION
It is a water-based, matte-looking, interior luxury white ceiling paint based on acrylic copolymer binder.
FEATURES
It has high breathability. It has a matte and smooth appearance. It has a very high covering ability.
It is used on interior surfaces such as old paint, putty, satin plaster and/or plasterboard.
20 Kilograms / Plastic Bucket
CONSUMPTION:
Depending on the type, absorbency and structure of the surface to be applied, 8-10 m² of area can be painted in a single coat with 1 Kilogram. A controlled sample study should be carried out for exact consumption.
DRYING TIME (at 20°C, 65% RH)
Touch dry: 1 hour
Second coat application: 6 hours
Final drying: 24 hours (drying time may be longer at higher relative humidity and lower temperatures).It can be stored for 3 years in its unopened packaging, in a cool and dry place, protected from frost and direct sunlight. Close the lid of the packaging immediately after use in an airtight manner.
R 43: May cause sensitization by skin contact.
S 2: Keep out of reach of children.
S 23: Do not breathe vapour.
S 24/25: Avoid contact with eyes and skin.
S 37: Wear suitable gloves.
S 46: If swallowed, seek medical advice immediately and show the container or label.
S 56: Dispose of this material and its container to hazardous or special waste collection point.APPLICATION
The surfaces on which the ceiling paint will be applied must be smooth, solid, dry, clean and in a condition that can carry the paint. Ceiling paint is applied in two coats with a brush and roller, and in one coat with spraying. Care must be taken to ensure that the surface temperature is between +5°C and +30°C during application. It is recommended to clean the tools used with water. Alya Ceiling Paint should be mixed in its original packaging until it becomes homogeneous before use. 18-24 hours must be waited for paint application on surfaces where primer has been applied. Alya Ceiling Paint is applied in two coats, waiting at least 2-3 hours between coats.THINNING
In brush and roller applications, it is recommended to dilute it by 25% with clean water and apply it in at least two coats.