ALYA TRANSPARENT INTERIOR – EXTERIOR PRIMER
DEFINITION
Styrene is an acrylic emulsion based, transparent wall primer used for interior and exterior purposes.
It is applied on surfaces with low-quality absorbent paint that have lost their properties, aerated concrete, etc., on highly absorbent and/or dusty surfaces.
-Photoroom.jpg)
FEATURES
Alya Exterior Primer should be used in the priming process before exterior paint applications. Thanks to its high penetration and water impermeability properties, it prevents the surface from absorbing and ensures that the paint integrates with the surface. It provides economy by reducing paint consumption.
15 Liter / Plastic Bucket
CONSUMPTION:
Depending on the type, absorbency and structure of the surface to be applied, 6-8 m2 of area can be painted with 1 litre in a single coat.
DRYING TIME (at 20°C, 65% RH)
Touch dry: 60 minutes,
Paint application: 4-6 hours,
Final drying: 24 hours (drying time may be longer at higher relative humidity and lower temperatures).It can be stored for 3 years in its unopened packaging, in a cool and dry place, protected from frost and direct sunlight. Close the lid of the packaging immediately after use in an airtight manner.
R 43: May cause sensitization by skin contact.
S 2: Keep out of reach of children.
S 23: Do not breathe vapour.
S 24/25: Avoid contact with eyes and skin.
S 37: Wear suitable gloves.
S 46: If swallowed, seek medical advice immediately and show the container or label.
S 56: Dispose of this material and its container to hazardous or special waste collection point.APPLICATION:
The surfaces where Alya Exterior Primer will be applied must be dry, clean and in a self-supporting condition. Alya Exterior Primer can be applied to the surface with a brush or roller without dilution. The surface temperature during application must be between +5°C and +30°C. The surface must be protected from frost during primer application and drying periods. Paint should be applied at least 3 hours after Alya Exterior Primer application. It should be applied without combing/polishing with a brush or roller (by making one turn on the surface in one direction). It is definitely not recommended to use the primer by diluting it with water or combing it, especially for insulation purposes, or to use it on glitolin paste or solvent-based primers and paints.THINNING:
It is ready to use, no dilution is required, if necessary it can be diluted with water.